Series 210 Specifications: RF Flange Ends | Butt Weld, Socket Weld, Threaded Ends

FEATURES:
  • TOP ENTRY: This valve can be permanently installed in the line and serviced from the top.
  • SOFT SEATED: PCTFE disc in our stainless steel* globe assembly provides a virtually bubble-tight seal. Stem/globe assembly is replaceable.
  • CONSTRUCTION: Stainless steel** investment cast body and bonnet to match your piping requirements.
  • SIZES: 1/2" through 6" (15mm through 150mm)
  • ENDS: RF flange, butt weld, socket weld, threaded (FNPT).
  • SERVICE: Liquefied and vaporized atmospheric gases, LNG.
  • TEMPERATURE RANGE: -325° F to +100° F (-196° C to +38° C)
  • PRESSURE RATING (cold, non-shock): Class 150 valve to 275 psig (19 bars) Class 300 valve to 720 psig (50 bars)

     * Also available in Naval Brass
     ** Stainless steel ASTM A351-CF8 (304)
       Registered for use in Canada.

Our investment cast stainless steel is specified by leading industrial gas companies for storage tank and yard operations.
Special bonnet extensions can be supplied for cold box operations.
Non-extended versions can be made available for selective cold gas and intermittent liquid service.
Price on application.
Valves for hydrogen service can be supplied.
For more information on sizes and prices, contact your Goddard representative or the factory.


   SPECIFICATIONS:
   Series 210 150#
STAINLESS BODY 150#
RF Flange Ends
Valve Size Figure Number Wt. lbs(kgs)
1/2" (15mm) * -
3/ 4" (20mm) * -
1" (25mm) S-210-8F 15 (6.80)
1 1/2" (40mm) * -
2" (50mm) S-210-16F 35 (15.88)
3" (80mm) S-210-24F 65 (29.48)
    * = Consult Factory
   Note: Unless otherwise specified, valves
   are not cleaned for oxygen service.
   Series 210 300#
STAINLESS BODY 300#
RF Flange Ends
Valve Size Figure Number Wt. lbs(kgs)
1/2" (15mm) * -
3/ 4" (20mm) * -
1" (25mm) S-210-8F3 20 (9.07)
1 1/2" (40mm) * -
2" (50mm) S-210-16F3 40 (18.14)
3" (80mm) S-210-24F3 70 (31.75)
4" (100mm) S-210-32F3 95 (43.09)
    * = Consult Factory

Top of Page

   Series 210 150#
STAINLESS BODY 150#
Butt Weld, Socket Weld, Threaded Ends
Valve Size Figure Number Wt. lbs(kgs)
1/2" (15mm) S-210-4SW
S-210-4T		 10 (4.54)
10 (4.54)
3/ 4" (20mm) S-210-6SW
S-210-6T 		10 (4.54)
10 (4.54)
1" (25mm) S-210-8SW
S-210-8T 		10 (4.54)
10 (4.54)
1 1/2" (40mm) S-210-12SW 20 (9.07)
2" (50mm) S-210-16BW S10
S-210-16BW S40		 30 (13.61)
30 (13.61)
3" (80mm) S-210-24BW S10
S-210-24BW S40		 50 (22.68)
50 (22.68)
4" (100mm) S-210-32BWSW 10
S-210-32BW S40		 75 (34.02)
75 (34.02)
6" (150mm) S-210-48BW S10
S-210-48BW S40		 180 (81.65)
180 (81.65)
   Note: Unless otherwise specified, valves
   are not cleaned for oxygen service.
   Series 210 300#
STAINLESS BODY 300#
Butt Weld, Socket Weld, Threaded Ends
Valve Size Figure Number Wt. lbs(kgs)
1/2" (15mm) S-210-4SW3
S-210-4T3		 15 (6.80)
15 (6.80)
3/ 4" (20mm) S-210-6SW3
S-210-6T3		 15 (6.80)
15 (6.80)
1" (25mm) S-210-8SW3
S-210-8T3		 15 (6.80)
15 (6.80)
1 1/2" (40mm) S-210-12SW3 25 (11.34)
2" (50mm) S-210-16BW3 S10
S-210-16BW3 S40		 35 (15.88)
35 (15.88)
3" (80mm) S-210-24BW3 S10
S-210-24BW3 S40		 55 (24.95)
55 (24.95)
4" (100mm) S-210-32BW3 S40 80 (36.29)
6" (150mm) S-210-48BW3 S10
S-210-48BW3 S40		 182 (82.55)
182 (82.55)

Site Navigation:
Globe Valves: 202/212   210   222   231   232   Gate Valves: 110   302   322
Swing Check Valves: 840 Bronze   886 Stainless Steel   Quikonnect Vacuum Couplings
Home Page   ||   Top of Page

REGO CRYO-FLOW PRODUCTS
3181 Lear Drive
Burlington, NC  27215  USA
Phone: (336) 226-3244
Fax: (336) 227-6294
Email: cflo@regoproducts.com

Click here for a complete list of REGO® Distributors.

AXSNE