Specifications: Series 202 | Series 212


  212 Pictured above


* Bronze body and bonnet - ASTM 1361.
   Registered for use in Canada.
FEATURES:
  • TOP ENTRY: This union-bonnet valve can be permanently installed in the line and serviced from the top.
  • CONSTRUCTION: Bronze* cast body and bonnet. Rugged construction for long life.

    Designed with unique Kold-Seal™ and high Cv. Standard PCTFE seat design assures bubble-tight sealing and high cycle life.

    Spare parts are common for both 202 and 212 Series with the exception of the stem.

    Series 202 - non-extended silicon brass stem.

    Series 212 - extended stainless steel stem.
  • ENDS: Threaded (FNPT), Sil braze tube (SBT), or with stainless steel pipe nipples brazed in.
  • SERVICE: Liquefied and vaporized atmospheric gases, LNG.
  • TEMPERATURE RANGE: -325° F to +100° F (-196° C to +38° C)
  • PRESSURE RATING (cold, non-shock): 300 psig (20 bar) also available in 400 psig (27 bar) for a series 202 for 600 psig (40 bar) see series 206

Economical design is ideal for non-critical applications.
Kold-Seal™ technology assures tight seal preventing cryogen loss.
Extended stem is for specific cryogenic applications.
Non-extended is for selective cold gas service.
For more information on sizes and prices, contact your Goddard representative or the factory.

   Series 202 SPECIFICATIONS:
Series 202 Bronze Globe Valves For Selective Cold Gas Applications
(manually operated)
Type GCBN Body-Bronze Non-Extended Stem - Silicon Brass
(for selected cold gas applications)
NPT Size
Inches (mm)		 Fig. No. Approx. Wt.
lbs. (kgs)		 SBT Size*
Inches (mm)		 Fig. No. Approx. Wt.
lbs. (kgs)
1/4" (8mm) GCBN-2T 1.25 (0.6) N/A N/A N/A
3/8" (10mm) GCBN-3T 1.25 (0.6) 3/8" (10mm) GCBN-3S 1.25 (0.6)
1/2" (15mm) GCBN-4T 1.75 (0.8) 1/2" (15mm) GCBN-4S 1.50 (0.7)
3/4" (20mm) GCBN-6T 2.50 (1.1) 3/4" (20mm) GCBN-6S 2.25 (1.0)
1" (25mm) GCBN-8T 3.50 (1.6) 1" (25mm) GCBN-8S 3.25 (1.5)
1 1/2" (40mm) GCBN-12T 7.0 (3.2) 1 1/2" (40mm) GCBN-12S 6.5 (3.0)
2" (50mm) GCBN-16T 11.75 (5.3) 2" (50mm) GCBN-16S 10.5 (4.8)
    * Nominal Size
   Note: Unless otherwise specified, valves
   are not cleaned for oxygen service.

Top of Page

   Series 212 SPECIFICATIONS:
Series 212 Bronze Globe Valves Extended Stem
(manually operated)
Type GCB Body-Bronze Non-Extended Stem - Silicon Brass
(for selected cold gas applications)
NPT Size
Inches (mm)		 Fig. No. Approx. Wt.
lbs. (kgs)		 SBT Size*
Inches (mm)		 Fig. No. Approx. Wt.
lbs. (kgs)
1/4" (8mm) GCB-2T 1.25 (0.6) N/A N/A N/A
3/8" (10mm) GCB-3T 1.25 (0.6) 3/8" (10mm) GCB-3S 1.25 (0.6)
1/2" (15mm) GCB-4T 1.75 (0.8) 1/2" (15mm) GCB-4S 1.50 (0.7)
3/4" (20mm) GCB-6T 2.50 (1.1) 3/4" (20mm) GCB-6S 2.25 (1.0)
1" (25mm) GCB-8T 3.50 (1.6) 1" (25mm) GCB-8S 3.25 (1.5)
1 1/2" (40mm) GCB-12T 7.0 (3.2) 1 1/2" (40mm) GCB-12S 6.5 (3.0)
2" (50mm) GCB-16T 11.75 (5.3) 2" (50mm) GCB-16S 10.5 (4.8)
    * Nominal Size
   Note: Unless otherwise specified, valves
   are not cleaned for oxygen service.

Site Navigation:
Globe Valves: 202/212   210   222   231   232  Gate Valves: 110   302  322
Swing Check Valves: 840 Bronze   886 Stainless Steel   Quikonnect Vacuum Couplings
Home Page   ||   Top of Page

REGO CRYO-FLOW PRODUCTS
3181 Lear Drive
Burlington, NC  27215  USA
Phone: (336) 226-3244
Fax: (336) 227-6294
Email: cflo@regoproducts.com

Click here for a complete list of REGO® Distributors.